|
AUDIO/VIDEO CONNECTIONS
7.1 Channels
AM/FM Tuner
56Tuner Presets: Group A-G: each 8 channels
6 RCA Analog inputs (incl. Front RCA)
2 Optical, 2 Coaxial SPDIF Digital Inputs
7/2 HDMI ver.1.4a In/Simultaneous Out
CEC (Control)
ARC (Audio Return Channel)
HDMI In Stand By
Auto Lip Sync.
Deep Color, x.v.Color
Pass through in Standby mode
2/1 Component In / Out
5/1 Composite In / Out
Front USB input for digital iPod Connection
7.1 Channel Input
Headphone Out
ADVANCED CONNECTIONS
iPhone/iPod Digital Connection
Bluetooth Wireless Audio Transmission Capability
External IR Receiver
Assignable HDMI / Component inputs
Marantz D-Bus(RC-5), Remote In / Out, RS232
Assignable 2.1 Channel Preamp-Out
Speaker A or B Switching
Phono Input
Assignable 12V trigger
AUDIO/VIDEO PROCESSING
ANALOG DEVICES: SHARC 32-bit Processor
Dolby: True HD/Digital Plus&EX/Pro Logic IIz, IIx
Dolby: II/Virtual Speaker/Headphone
DTS: HD Master&High Res. Audio/ES/96/24/
DTS: Discrete&Matrix6.1/Neo:6/Express
DTS Neural Surround
Multi Ch Stereo
Audyssey MultEQ-XT Auto Calibration w/ MIC
Audyssey Dynamic EQ / Dynamic Volume / DSX
9 Band EQ, -20dB - +6dB
Independent Crossover Setting for each speaker
Lip-sync (digital audio delay) 0-200 msec
Volume Control Setting: Limit, Power On Vol
Mute Level, Display type (dB or 0-99)
HDMI and Analog to HDMI I/P Scaling
OSD output over HDMI
Individual Image Adjustments
USER CONFIGURABLE FEATURES
Input Level Adjust
Input Assign (Component In/Digital In)
Input Rename
Input Skip
On Screen Display (TEXT)
Display Status Info.
Software Upgradable
NETWORK FEATURES
Ethernet port
WEB Interface
IP-based control, system backup/restore
DLNA1.5 certified
Stream audio and photos from all connected PC’s
vTuner Internet Radio w/ 14000 pre-loaded stations
Stream audio and photos from Internet:
Rhapsody
Pandora
Napster
Flicker
App Control
MARANTZ AUDIO ADVANTAGE
All-discrete, 100w x 7 Class AB Output Stage
High Current Linear Power Supply
EI Core Power Transformer
Pure Direct / Source Direct
M-DAX (Marantz Dynamic Audio eXpander)
Front Bi-Amp Drive Capability (Speaker C)
Fully Discrete Amplification
192kHz/24-bit Audio DACS
Three audio zones w/ Tone Control, Mono Mode and HPF
Dual PLL Anti-jitter Circuit |
Audio Section:
• Power amplifier
Rated output: Front:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Center:
110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround back:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Output connectors: (SPEAKER A+B: 8 Ω)
• Analog
Input sensitivity/Input impedance: 200 mV/47 kΩ
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT
mode)
S/N: 100 dB (IHF–A weighted, DIRECT mode)
Distortion: 0.005 % (20 Hz – 20 kHz) (DIRECT mode)
Rated output: 1.2 V
• Digital
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input: Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
S/N: 74 dB (A weighting, with 5 mV input)
Rated output: 150 mV
Distortion factor: 0.03 % (1 kHz, 3 V)
Video Section:
• Standard video connectors
Input/output level and impedance: 1 Vp-p, 75 Ω
Frequency response: 5 Hz – 10 MHz — 0, –3 dB
(when “Video Convert” set to “OFF”)
• Color component video connector
Input/output level and impedance: Y (brightness) signal — 1
Vp-p, 75 Ω
PB / CB signal — 0.7 Vp-p, 75 Ω
PR / CR signal — 0.7 Vp-p, 75 Ω
Frequency response: 5 Hz – 60 MHz — 0, –3 dB (when “Video
Convert” set to “OFF”)
Tuner Section [FM] [AM]:
(Note: μV at 75 Ω, 0 dBf = 1 x 10–15 W)
Receiving Range: 87.5 MHz – 107.9 MHz 530 kHz – 1710 kHz
Usable Sensitivity: 1.5 μV (14.8 dBf) 20 μV
S/N: MONO 78 dB (IHF–A weighted, DIRECT mode)
STEREO 68 dB (IHF–A weighted, DIRECT mode)
HD 85 dB 85 dB
Total harmonic Distortion (at 1 kHz): MONO 0.1 %
STEREO 0.2 %
HD 0.02 % 0.02 %
General:
Power consumption: 650 W
0.2 W (Standby)
2.2 W (CEC standby) |
